MASTERPLAST

In new build applications, Masterplast rendering systems can help the way in which a wall is finished with attention to operational conditions for a given building. To that end systems include modern thin-coat renders which differ in terms of operational properties, so that the most appropriate solution can be selected.

PROTECTION

Rendering systems provide protection for structural elements. They protect against atmospheric (rain, snow, wind) and operational (aging processes, mechanical damage) factors. This improves the building and its individual elements life span and gives façade a new, elegant appearance.

DESIGN

Rendering systems offer a wide range of possible façade finishes from traditional smooth plasters to modern thin-coat renders of decorative and attractive appearance. You can combine various materials on the façade surface and use both intense and pastel colours.

COLOUR

Render and paints for façades are coloured within the mass (body tinted) with UV-resistant pigments. Rich palette of colours allows them to be independent when choosing the final characteristic of the façade. Overall, the designer may select from standard shades and colours prepared to meet the current market expectations regarding the most fashionable pastels.

RENDER & PAINTS

Render and paints for façades are coloured within the mass (body tinted) with UV-resistant pigments. Rich palette of colours allows them to be independent when choosing the final characteristic of the façade. Overall, the designer may select from standard shades and colours prepared to meet the current market expectations regarding the most fashionable pastels.

Thermomaster SK (silicone)

• Benefits:
• • Competitively priced
• • High resistance to dirt – silicone renders form surface of tight and a non- absorptive structure which repel contamination (dust, fumes, organic dirt)
• • render ability for surface self-cleaning during precipitation
• • very high flexibility and resistance of the finishing coat
• • wide selection of colourful renders, various possibilities of the building final appearance

N.B. To prepare the surface Thermomaster Universal Primer is required.

Coverage: Thermomaster (silicone) 1.5 mm:   2.5 kg /m2  (SK) 2.0 mm:  3.1 kg /m2 (SK) 2.0 mm:  2.8 kg / m2 (SG) | Application temperature: Base surface and ambient temperature (+) 5 and (+) 25 ° C, relative humidity of air up to 80%. Do not expose the surface to strong, direct sunlight, drafts, or moisture | Drying time: 24-48 hours (depending on external conditions) | Shelf-life: in unopened packaging for 12 months from the date of manufacture, in the case of storage conditions (in properly sealed packaging, in a dry, cool, sunny and frost-free place, (+) 5 and (+) at 25 ° C and keep it out of reach of children) | Packaging: 25 kg / bucket.

Thermomaster Façade Paint

An acrylic resin-based, high-adhesion and topcoat, good vapour-permeable, water-repellent facade paint, which is resistant to flue gas, UV radiation and other atmospheric effects.

Application: Sufficiently solid, surface-shaped, rough or smooth, with improved facade surfaces (minimum one month of cement and cement plaster, at least two months of uncoated concrete facade surfaces), as well as of old, well-adhesive acrylic, silicate and silicone paint coatings, as a decorative topcoat for restoration of plaster, above base plane, on waterproofed vertical surfaces indoors and outdoors. It can also be used for maintenance painting of façade surfaces infected with algae or mould after pre-disinfection. The base renders can be coloured in 150 colours of the Thermomaster colour card, but the applicability of the given shade in facade thermal insulation systems on the colour card. | Surface Preparation: Thermomaster Universal Foundation or Thermomaster A 1: 1 Mixture of Facial Paint and Clear Water, Material Consumption – 100 g / m ² | Coverage: in two layers, 300-700 ml / m ² (depending on the absorbency and roughness of the surface) | Application temperature: Base surface and ambient temperature (+) 5 and (+) at 35 ° C, relative humidity of air up to 80%. Do not expose the surface to strong, direct sunlight, drafts, or moisture. | Drying time: 24 hours (+20 ° C, relative humidity: 65%) | Application: The first layer can be applied with a soft-roller (Teddy type), textile dye roller or paint brush after drying of the primed surface (after 6 to12 hours). After complete drying of the first layer (+ 20⁰C, 65% rel. Humidity after 6 hours), the second layer can be applied from one end of the surface to the other without interruption. | Shelf life: With unopened packaging for 18 months from the date of manufacture, provided that the storage conditions are met (in properly sealed packaging, in a dry, cool, sunny and frost-free place, (+) 5 and (+) at 25 ° C, out of the reach of children) | Bucket size: 5 ltr / bucket or 16 ltr / bucket.

PRIMER & BASECOATS

Thermomaster Universal Primer

Application: Thermomaster primer is used as a priming substrate for acrylic and silicone thin screeds on the facade to prepare the substrate for even absorbency and good adhesion | Apply primer: Properly solid, dry, flat; from cracks, dust and other contaminants (i.e. efflorescent and separators, etc) as well as loose, free-standing substrates, with a roller or brush in one layer | Coverage: 1.2 – 2 ltrs /m ² | Dilution: max. 5% water dilution if necessary. | Application conditions: Base surface and ambient temperature (+) 5 and (+) 35 ° C, relative humidity of air up to 80%. Do not expose the primed surface to strong, direct sunlight, drafts, or moisture. | Drying time:  6-12 hours (at 20 ° C, 65% humidity) | Shelf-life: with unopened packaging for 12 months from the date of manufacture, in the case of storage conditions (in properly sealed packaging, in a dry, cool, sunny and frost-free place, (+) 5 and (+) at 25 ° C, keep out of reach of children) | Packaging: 5kg or 18kg bucket

Thermomaster Fix (facade adhesive and basecoat)

Material : cement-based, adhesive with additive properties | Application : facade thermal insulation systems for bonding EPS and rough surface XPS thermal surfaces (eg plaster, brick, concrete) and embedding glass mesh | Coverage : for bonding EPS sheets 4 – 5 kg / m ² & for bedding mesh 4.5 kg / m ² | Application temperature : (+) 5 – (+) at 25 ° C. (+) Above 25 ° C only with additional measures | Adhesion strength : EPS for min. 0.08 N / mm ² for base surface min. 0.25 N / mm ² | Packaging: 25 kg bag

ISOMASTER EPS H-80 G

Application: EPS thermal insulation of façade thermal insulation systems, protected from moisture, installed above the base line. Adhesive is recommended using Thermomaster Fix. The product should be protected from direct sunlight during storage and transport.

Material: Grey expanded polystyrene (EPS) with graphite additive with improved thermal conductivity | Thermal conductivity factor: 0.032 W/mK | Size: 500mm × 1000mm | Coverage: 0.5m ² / sheet | Thickness: 20mm to 200mm thick | Relevant product standard: EN 13163 | Fire class: E (according to EN 13501-1) | Type designation: EPS-EN 13163-T (1) -L (2) -W (2) -S (2) -P (5) -BS125-CS (10) 80-DS (N) 2-DS (70, -) 3-TR150

ISOMASTER XPS SVRrigid thermal insulation

Application: ISOMASTER XPS SVR is a closed- cell polystyrene suitable for plinth, basement wall, arcade, wreath, etc. as a thermal insulation. The closed cell makes the product impervious to moisture and is ideal for applications underground, cellar walls etc. The surface is roughened (giving an ideal key) to aid in gluing and adhesion qualities. | Material: straight edged, rough surface, yellow or blue extruded polystyrene (XPS) | Type designation: XPS EN 13164-T1-DS (23.90) -DLT (1) 5-CS (10 / Y) 200-300-TR100-WL (T) 1.5. | Thermal conductivity: thickness <80 mm = 0.035 W / mK • thickness 80 ≤ – <120 = 0.036 W / mK • thickness ≥ 120 mm = 0.038 W / mK | Size: 600 mm × 1250 mm | Fire class: E (EN 13501-1) | Relevant standard: EN 13164 | Thickness: 20mm to 120mm

FIXINGS & MESH

Fischer DIPK/10 dowel

Application: Mechanical fastening of thermal insulation boards, medium strength. | Material: polyethylene disc dowel, glass fibre reinforced plastic insert. | Coverage: will vary on application and insulation to be fixed ( 4 – 6 – 8 – 12 dowels / m/2 | Types: 10 mm bore diameter;  60, 90,130 & 150 mm long | Extraction force from concrete, solid brick and solid sand from brick (design value): 0.15 kN | Drilling depth: min. 30 mm

Mesh MASTERNET PREMIUM 160

Applications: THERMOMASTER reinforcing mesh for facade insulation systems and coating insulation | Material: glass fabric mesh with alkaline coating | Coverage: 1.1 m ² / net m ² | Relevant regulations: meet the requirements of ETAG 004 and EN 13499 | Packaging: 1 m × 50 m = 50 m ²

EWI

the above renders and components can also be utilised as part of a fully insulated system which would utilise three different insulation options:

• EPS (White)
• EPS (Enhanced)
• Mineral Wool (XPS – for plinth and below DPC)

Please note:

We have tried to provide information on our website mainly for technical and product specific purposes. To our knowledge this information is current but we are always reliant on the various manufacturers keeping us informed of any changes or updates where applicable. Can we ask that for any specific help or assistance that you either make contact with our office and or visit our trade counter showroom were one of our team members who are solely focused on providing expert advice for your project and specification needs will be pleased to help!