SILICONE
Ready mixed composition – consisting of synthetic resins & dolomite aggregate.
This forms a dense and spotted texture 1.5 or 2.0mm in thickness.
Suitable for indoor and outdoor applications.
Coverage 2.5kg / 1m2 – supplied in 25kg tubs.
Applications include – Render only and decorative element to EWI systems.
(EPS, XPS & Mineral Wool insulation options)
Excelling in exposure areas prone to soiling, busy roads, city centres and dense clusters of greenery.
Substrates for coating to include, concrete, thermal and dense building blocks, bricks of various types.
The colours as available options extend to 400 SAH types sustaining its durability and high resistance to UV exposure.
To help with specifics for the different variants available downloads as below:
ATLAS SILICONE RENDER – thin – coat silicone render
Description
Thin-coat render for the execution of the finishing coats with a decorative spotted texture.
For façades exposed to dirt and difficult operation conditions – in the vicinity of roads, industrial zones and urban centres surrounded by green areas or with high pollution.
The main characteristics
• vapour permeable
• low water absorptiveness
• highly resistant to dirt
• high adhesion to the substrate
The main parameters
• consumption: ca 2.5 kg for 1 m²
• spotted texture
• 400 SAH colours
ATLAS ACRYLIC – SILICONE RENDER – thin – coat hybrid silicone render
Description
Thin-coat render for the execution of the finishing coats with a decorative spotted texture.
Ideal for façades exposed to dirt and difficult operation conditions – in the vicinity of roads, industrial zones and urban centres surrounded by green areas or with high pollution.
The main characteristics
• vapour permeable
• very low water absorptiveness
• highly resistant to dirt
• high adhesion to the substrate
The main parameters
• consumption: ca 2.5 kg for 1 m²
• spotted texture
• 400 SAH colours
ATLAS SILICATE RENDER – thin-coat silicate render
Description
ATLAS SILICATE RENDER is designed for application of decorative and protective thin-coat rendering coats, outdoors and indoors, upon existing and newly constructed buildings:
• in external thermal insulation composite systems (ETICS) with the use of polystyrene (EPS),
• upon even, appropriately prepared mineral substrates (e.g. concrete, traditional cement and cement-lime plasters).
The main characteristics
• long term durability and façade protection
• highly alkaline and naturally resistant to mould, algae and lichen
• perfect water vapour and CO2 permeability
• hydrophobic, highly resistant to atmospheric factors and UV radiation
• outstanding colour durability
The main parameters
• consumption: approx 2.5 / 1 m²
• bonding: ≥ 0.35 MPa
• 264 colours
ATLAS ACRYLIC RENDER – thin – coat acrylic render
Description
Thin-coat render for the execution of the finishing coats with a decorative spotted texture.
For façades exposed to dirt and difficult operation conditions – works perfectly on commercial buildings, outbuildings and public access buildings (schools, kindergartens, hospitals, etc.)
The main characteristics
• low water absorptiveness
• resistant to dirt
• high adhesion to the substrate
• easy texture forming
• increased resistance to mechanical damage
The main parameters
• consumption: from ca 2.5 – 3.0 kg for 1 m²
• spotted texture
• 400 SAH colours
Silicone render, with additional reinforcement
Excellent system durability – owing to the main coat of adhesive with reinforcing mesh embedded and very low absorption of the finishing coat – very high resistance to dirt – silicone renders included in this system form a surface of tight and not absorptive structure which repel contamination (dust, fumes, organic dirt) – high resistance against biological contamination – render ability for surface self-cleaning during rain – wide selection of renders coloured in the mass, various possibilities for the building final appearance.
Possible use – types of buildings:
Residential buildings • Industrial buildings • Farm and rural buildings
• Commercial, public access and service buildings.
Possible use – buildings location:
Urban and urbanised areas • farms and rural areas • wetlands, damp areas, areas in proximity to water reservoirs• areas in proximity to green zones and forests • shaded areas
